Software Support
How-to’s and problem solving steps for users of SyringePumpPro.
Have You Got Cables? – Start Here
Got pump cables? What do you need? Where do you get them? DIY Cables - all answered here.
Target computer has no internet connection
There are lab computers, computers in factories, and computers in secure facilities, and even super secret facilities, that don't have an internet connection available. There are computers that deal with information or processes that cannot take the risk of infection, or interruption by 3rd parties. This is a familiar scenario to me as I used [...]
V1 How Confirm Your Downloaded Installer
Having trouble running the installer? Perhaps you have a bad download. How can you confirm that your download is exactly the file it should be? Right click on the downloaded installer program and click properties. Now look for the digital signature tab. Click the digital signature tab and you should see. The signature should be [...]
Can SyringePumpPro control your DIY syringe pump?
Above photo from Open Syringe Pump If you build your own syringe pump - can SyringePumpPro control it? To command pumps, SyringePumpPro sends ASCII commands over an RS232 connection to the controller inside laboratory and OEM pumps. For example, to get the pump to infuse 750mls per hour the command sent to the pump would be [...]
Installation Guide
Thank you for choosing SyringePumpPro! Just follow these easy steps to get started: On your computer double click the installer executable file. NOTE: SyringePumpPro does not support installation on network shares, or running multiple copies of SyringePumpPro from a single network folder. License [...]
More than one pump at a time
32 pumps one SyringePumpPro I am often asked Can you connect more than one pump? Can you mix manufacturers? Can you mix pump models? Can you mix syringe with peristaltic pumps? Can you connect more than one pump at a time? This photo is my answer - yes up to 100 pumps at [...]
Different models and brands at the same time
I get asked this regularly - can you mix and match pump models, and manufacturers. Yes. I do it every day. My pumps have come from all over, they are a wide range of ages - thus software versions in the pump - and I make a point of testing SyringePumpPro with a mix of [...]
Video: Introduction to Pump Programming
If you are new to pumps and pump programming and would like an introduction to the process, this video is for you. You will learn - How to read and write pump programs How to use the pump programming spreadsheet. How to manually enter a pump program using the front panel buttons on the pump. [...]
Operate an OEM pump without buttons or display?
Here we play while the rest of the world sleeps, or so it seems. When I get up in the morning the second thing I do is read my email. First thing? This is when I get customers and potential customers asking questions. Questions about applications and problems. One of today's potential customers had [...]
TTL Inputs and Outputs
TTL Ports - Button Pumps Pump TTL Db9 Connector NOTE: This page applies to the pumps listed in my compatibility page. All pumps OEM and others, the TTL output ports are available on the DB9 connector on the rear panel. This connector is not the RS-232 port! The following chart shows the [...]