Pump Connectivity
This page deals with pump to computer connectivity issues. Many commonly reported issues and how to fix them are covered here.
RS-232 pump connections – DON’T USE the DB9 Connector
Had a report recently from a customer who said my software constantly crashed. My software shouldn't' crash - ever but there will be problems from time to time - I [...]
TTL Inputs and Outputs
TTL Ports - Button Pumps Pump TTL Db9 Connector NOTE: This page applies to the pumps listed in my compatibility page. All pumps OEM and others, the [...]
Pumps and Wireless RS232 Connections
Can you use wireless RS232 devices to connect to your pumps over greater distances or into areas where it's difficult to run wiring? Yes - but there are problems. I [...]
32 Connected Pumps
32 pumps - One SyringePumpPro installation How many pumps can be connected to a pump network? Can you connect to different pump models and brands? Most manufacturers support [...]
Continuous Infusion Pump Set and SyringePumpPro
Continuous Infusion Syringe Pump System If one of your pumps is configured to be the master pump in a Special Application:Continuous Infusion/Dual Syringe Pump System it wont communicate [...]
Building a Pump Network
If you have more than one pump, this article will show you what components you need to connect them together to your computer. It's contains a shopping list of [...]
Lost Pump Connection
Your working with your pumps and everything seems fine. Suddenly or the next day you suddenly lost pump connections, What should you try? What's likely to be the problem? Check [...]
What Com Port is my USB-RS232 adaptor using?
This page will show you how to find the com port number of your USB-RS232 device To get your USB-RS232 adaptor working with SyringePumpPro you need to configure the [...]
Log file is full of failed communications attempts
The log file shows repeated entries like this Failed to open serial port , .COM1 , Error code: 2 -- The system cannot find the file specified. This entry is [...]